|
Simple to Use: Learn how to use the MiniLogger in
just minutes, not hours. There are no programs to write, no switches to set,
and only four wires to connect.
Economical: Four or five VW MiniLoggers can be
deployed for less than the cost of one full-sized logger. Cost savings in
cables are also available, since MiniLoggers can be placed close to the
sensor.
Reliable: The MiniLogger is rated for temperatures
between -20 and +50 degrees C, and its encapsulated electronics are
impervious to humidity and condensation. Readings are stored in secure,
non-volatile memory.
Convenient Data Processing: The MiniLogger Manager
program retrieves readings and stores them in an ASCII file, ready to open
with a spreadsheet. The file contains two data values for each reading: a
value in Hz and a value in engineering units. Thus calibration factors need
not be applied in the spreadsheet.
Argus Compatible: The MiniLogger Manager
program can save readings in the Campbell CR10 data format.
Wireless Option: The wireless option is
useful when access to the logger is difficult or when frequent retrieval is
required. The wireless option is available in a spread-spectrum 900 Mhz
version, which offers greater range and uses less power, but is normally
used only in North America, or in a spread-spectrum 2.4 Ghz version, which
offers less range and uses more power, but meets requirements in other parts
of the world.
Small: The MiniLogger measures 100 x 100 x 90 mm
high (4 x 4 x 3.5 inch).
|
