CEP INSTRUMENTS & SERVICES

[CR1000] [CR800] [Data Taker] [Multiplexer] [Real-Time Instrumentation Monitor System] [ uMonitor Software] [ uGraph Software] [VW MiniLogger]

CAMPBELL SCIENTIFIC - CR1000 DATALOGGER FOR MEASUREMENT AND CONTROL

Application

The CR1000 datalogger builds on the foundation of CR10 and CR10X dataloggers. The CR1000 retains the versatility of the earlier loggers with a detachable wiring panel, separate power supply, and optional keyboard display. It features increased memory and more measurement channels than previous dataloggers in this series, and an RS-232 port for communication.

When used as part of a data acquisition system, the CR1000 datalogger provides measurement and control functions. A complete system would include a power supply, weatherproof enclosure, sensors, programming/communications software, and communications peripherals.

 

                

Features
  • Designed for unattended network applications

  • Consists of a measurement and control module and the CR1000WP, a detachable wiring panel

  • 4 MB SRAM for data storage, program storage and CPU usage

  • Additional data storage using CFM100 Module with a CompactFlash® card

  • Data stored in table format

  • Operating system: PakBus®

  • Software support offered in LoggerNet 3.x, PC400 1.2, or ShortCut 2.2

  • Detachable keyboard/display, the CR1000KD, can be carried to multiple stations.

 

Specification
  • Analog inputs: 16 single-ended or 8 differential, individually configured
  • Pulse counters: 2
  • Switched voltage excitations: 3
  • Control/digital ports: 8
  • RS-232 port: 1
  • CS I/O port: 1
  • Scan rate: 100 Hz
  • Burst mode: 1500 Hz
  • Analog volt. resolution: to 0.33 uV
  • A/D bits: 13
  • Programming: CRBasic
  • Data Storage: Table
  • Telecommunications: PakBus
 
* Click to download datasheet [CR1000 Datalogger]

Copyright © 2009 CEP Services Pte. Ltd